SM320F2812KGDS150A

C2000™ High Temperature 32-bit MCU with 150 MHz, 256 KB Flash, EMIF

Manufacturer：

Luminary Micro/Texas Instruments

copy

Manufacturer NO：

SM320F2812KGDS150A

copy

Product SN：

10445-SM320F2812KGDS150A

copy

Package/Case：

copy

Manufacturer Lead Time：

copy

Datasheet:

SM320F2812KGDS150A Datasheet PDF

copy

Detailed Descripition：

2-pin oscillator, CAN, CPU timers, External memory interface, McBSP, Military qualified, Single zone code security, Watchdog timer

copy

Product Application Field：None

0 In Stock

Finding Goods Through Sales

Want the lower wholesale price? Please send RFQ, we will respond immediately

Customer Reference

Quantity

Product price

No prices available at the moment

For more SM320F2812KGDS150A prices, contact customer service to get a discount!

Documents & Media

Datasheets PDF SM320F2812KGDS150A Datasheet PDF

Product Description

The SM320F2812 device, member of the C28xE DSP generation, is a highly integrated, high-performance solution for demanding control applications. The functional blocks and the memory maps are described in Section 3, Functional Overview.

Throughout this document SM320F2812 is abbreviated as F2812.

High-Performance Static CMOS Technology
- 150 MHz (6.67 ns Cycle Time)
- Low Power (1.8 V Core at 135 MHz, 1.9 V, Core at 150 MHz, 3.3 V I/O) Design
- 3.3 V Flash Voltage
JTAG Boundary Scan SupportIEEE Standard 1149.1-1990, IEEE Standard Test-Access Port
High-Performance 32 Bit CPU (TMS320C28x)
- 16 × 16 and 32 x 32 MAC Operations
- 16 × 16 Dual MAC
- Harvard Bus Architecture
- Atomic Operations
- Fast Interrupt Response and Processing
- Unified Memory Programming Model
- 4M Linear Program Address Reach
- 4M Linear Data Address Reach
- Code-Efficient (in C/C++ and Assembly)
- TMS320F24x/LF240x Processor Source Code Compatible
On-Chip Memory
- Flash Devices: Up to 128K × 16 Flash (Four 8K × 16 and Six 16K × 16 Sectors)
- ROM Devices: Up to 128K × 16 ROM
- 1K × 16 OTP ROM
- L0 and L1: 2 Blocks of 4K × 16 Each Single-Access RAM (SARAM)
- H0: 1 Block of 8K × 16 SARAM
- M0 and M1: 2 Blocks of 1K × 16 Each SARAM
Boot ROM (4K × 16)
- With Software Boot Modes
- Standard Math Tables
External Interface
- Up to 1M Total Memory
- Programmable Wait States
- Programmable Read/Write Strobe Timing
- Three Individual Chip Selects
Clock and System Control
- Dynamic PLL Ratio Changes Supported
- On-Chip Oscillator
- Watchdog Timer Module
Three External Interrupts
Peripheral Interrupt Expansion (PIE) Block That Supports 45 Peripheral Interrupts
128 Bit Security Key/Lock
- Protects Flash/ROM/OTP and L0/L1 SARAM
- Prevents Firmware Reverse Engineering
Three 32 Bit CPU Timers
Motor Control Peripherals
- Two Event Managers (EVA, EVB)
- Compatible to 240xA Devices
Serial Port Peripherals
- Serial Peripheral Interface (SPI)
- Two Serial Communications Interfaces (SCIs), Standard UART
- Multichannel Buffered Serial Port (McBSP) With SPI Mode
12 Bit ADC, 16 Channels
- 2 × 8 Channel Input Multiplexer
- Two Sample-and-Hold
- Single/Simultaneous Conversions
- Fast Conversion Rate: 80 ns/12.5 MSPS
Up to 56 Individually Programmable, Multiplexed General-Purpose Input / Output (GPIO) Pins
Advanced Emulation Features
- Analysis and Breakpoint Functions
- Real-Time Debug via Hardware
Development Tools Include
- ANSI C/C++ Compiler/Assembler/Linker
- Supports TMS320C24x/240x Instructions
- Code Composer Studio IDE
- DSP/BIOS
- JTAG Scan Controllers [Texas Instruments (TI) or Third-Party]
- Evaluation Modules
- Broad Third-Party Digital Motor Control Support
Low-Power Modes and Power Savings
- IDLE, STANDBY, HALT Modes Supported
- Disable Individual Peripheral Clocks
APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Extreme (–55°C/220°C) Temperature Range⁽¹⁾
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
- Texas Instruments high temperature products utilize highly optimized silicon (die)
  solutions with design and process enhancements to maximize performance over
  extended temperatures.